A reliable low cost solution for your test cable needs.

  • Rugged construction for durability utilizing steel wire reinforced PVC protective outer jacket and stainless steel connectors
  • Excellent VSWR and Attenuation
  • Phase stable
  • SMA to SMA styles offered in 18 GHz and 40 GHz versions
  • Available in custom lengths

MECHANICAL
Inner Conductor: Silver-plated copper clad steel
Dielectric: PTFE
Inner Shield:  Silver-plated flat ribbon braid
Intermediate Shield: Composite Aluminum Tape
Outer Shield: Silver-plated round wire braid
Jacket: FEP
Protective Outer Jacket: Steel wire reinforced PVC (.45 in. O.D.)
Connectors:
Stainless Steel Material
Temp Range:
-55°C to +100°C
Connector Retention:
80 lbs. minimum
Minimum Bend Radius:
1.0 inches

ELECTRICAL

Impedance:

50 Ohms
Capacitance: 29.4 pF/foot
Velocity of Propagation: 69.5%
DC Resistance: 2.9 Ohms/1000 ft.
Shielding Effectiveness: 90dB min.  
 
Part Number
Connector Type
Freq. GHz
Length Inches
VSWR
to Max. Freq.
Typ. Attenuation @ +25°C dB/100 ft.
1 GHz
3 GHz
5 GHz
10 GHz
13.5 GHz
18 GHz
26 GHz
40 GHz
301600-18-24
SMA P- SMA P
DC to 18
24
1.20:1
12
24
32
49
60
70
 
 
301600-18-36
SMA P- SMA P
DC to 18
36
1.20:1
12
24
32
49
60
70
 
 
301600-18-48
SMA P- SMA P
DC to 18
48
1.20:1
12
24
32
49
60
70
 
 
301600-18-60
SMA P- SMA P
DC to 18
60
1.20:1
12
24
32
49
60
70
 
 
301600-18-72
SMA P- SMA P
DC to 18
72
1.20:1
12
24
32
49
60
70
 
 
301600-40-24
SMA P- SMA P
DC to 40
24
1.35:1
12
24
32
49
60
70
89
115
301600-40-36
SMA P- SMA P
DC to 40
36
1.35:1
12
24
32
49
60
70
89
115
301600-40-48
SMA P- SMA P
DC to 40
48
1.35:1
12
24
32
49
60
70
89
115
301600-40-60
SMA P- SMA P
DC to 40
60
1.35:1
12
24
32
49
60
70
89
115
301600-40-72
SMA P- SMA P
DC to 40
72
1.35:1
12
24
32
49
60
70
89
115
301601-18-24
SMA P- SMA J
DC to 18
24
1.20:1
12
24
32
49
60
70
 
 
301601-18-36
SMA P- SMA J
DC to 18
36
1.20:1
12
24
32
49
60
70
 
 
301601-18-48
SMA P- SMA J
DC to 18
48
1.20:1
12
24
32
49
60
70
 
 
301601-18-60
SMA P- SMA J
DC to 18
60
1.20:1
12
24
32
49
60
70
 
 
301601-18-72
SMA P- SMA J
DC to 18
72
1.20:1
12
24
32
49
60
70
 
 
301601-40-24
SMA P- SMA J
DC to 40
24
1.35:1
12
24
32
49
60
70
89
115
301601-40-36
SMA P- SMA J
DC to 40
36
1.35:1
12
24
32
49
60
70
89
115
301601-40-48
SMA P- SMA J
DC to 40
48
1.35:1
12
24
32
49
60
70
89
115
301601-40-60
SMA P- SMA J
DC to 40
60
1.35:1
12
24
32
49
60
70
89
115
301601-40-72
SMA P- SMA J
DC to 40
72
1.35:1
12
24
32
49
60
70
89
115
301603-18-24
N P- N P
DC to 18
24
1.25:1
12
24
32
49
60
70
 
 
301603-18-36
N P- N P
DC to 18
36
1.25:1
12
24
32
49
60
70
 
 
301603-18-48
N P- N P
DC to 18
48
1.25:1
12
24
32
49
60
70
 
 
301603-18-60
N P- N P
DC to 18
60
1.25:1
12
24
32
49
60
70
 
 
301603-18-72
N P- N P
DC to 18
72
1.25:1
12
24
32
49
60
70
 
 
301604-18-24
SMA P- N P
DC to 18
24
1.20:1
12
24
32
49
60
70
 
 
301604-18-36
SMA P- N P
DC to 18
36
1.20:1
12
24
32
49
60
70
 
 
301604-18-48
SMA P- N P
DC to 18
48
1.20:1
12
24
32
49
60
70
 
 
301604-18-60
SMA P- N P
DC to 18
60
1.20:1
12
24
32
49
60
70
 
 
301604-18-72
SMA P- N P
DC to 18
72
1.20:1
12
24
32
49
60
70
 
 

Tolerances on assemblies: <24 inches +.50 / -0
  24 to 48 +1.00 / -0
  49 to 72 +1.50 / -0
  73 to 120 +2.00 / -0
   
For custom lengths. please consult factory. The last digits in the part number are the over all length of the cable assembly, e.g. 301601-18-11 would be a SMA Plug to SMA Jack test cable that operates optimally up to 18 GHz and is 11 inches long.


Click on Test Cable Datasheet below for Printable PDF version